The mass of AB is 2kg, the dynamic friction coefficient of 4kga and the table top is 0.02. When object B is released gently, the acceleration of object a sliding along the table top is?

a=(m1g-μm2g)/m2=(2*10-0.02*4*10)/4=4.8m/s^2

RELATED INFORMATIONS

1. A uniform thin rod with length L and mass m is placed flat on a horizontal table with friction coefficient M. suppose that the rod rotates around the center o with angular velocity W at the beginning and perpendicular to the axis of the table. Try to find (1) the friction torque used on the rod. (2) how long does it take for the rod to stop rotating
2. The friction coefficient between the object and the table is u. The displacement s caused by pushing the object with force F is to remove F, How far can an object go
3. As shown in the figure, there is a light spring on the horizontal table, the left end is fixed at point a, and the right end is at point B in the natural state. There is a vertical spring on the right side of the horizontal table
4. As shown in the figure, there is a light spring on the horizontal table, the left end is fixed at point a, and the right end is located at point B when the spring is in the natural state. The height of the table is h. The object P with mass m compresses the spring slowly to point C to release it. After passing point B, the object P moves in a straight line with uniform deceleration, flies off the table from point D on the right edge, and falls to point n on the horizontal ground The distance between the two points is also s, the dynamic friction coefficient between the object P and the table is μ, the acceleration of gravity is g, the object P can be regarded as a particle, and the spring is within the elastic limit, regardless of the air resistance (1) If the mass of 5 m block Q (also can be regarded as a mass) slowly compresses the spring to point C, and the released block Q just stops at point B, suppose that the two blocks are made of the same material and have the same surface roughness, calculate the distance L between two points B and C
5. Two sliders A and B with mass M1 and M2 are horizontally connected by a light spring and placed on the horizontal table top My answer is C. I think there is a problem My problem stem is the problem in the screenshot, I just don't want to type it out again
6. The ball with mass m = 1kg passes through the inclined rod, which forms an angle of θ = 30 ° with the horizontal direction, If the ball is pushed by a horizontal force of F = 20n, it can accelerate the ball to slide up the bar 1. The sliding friction coefficient between the ball and the inclined rod 2. The acceleration of the ball sliding upward along the rod
7. A small ball fell from the air onto a spring placed vertically on the ground and asked what would happen to the state of the ball How does the acceleration change? How does the speed change? When is the maximum speed? When is the maximum acceleration It starts with the contact spring
8. As shown in the figure, on a rough horizontal plane, there are two pieces of wood 1 and 2 with mass M1 and M2 respectively. In the middle, they are connected by a light spring with original length L and stiffness coefficient K. the sliding friction coefficient between the block and the ground is μ. Now, a horizontal force is used to pull the block 2 to the right. When the two blocks move at a constant speed, the distance between the two blocks is () A. L+μkm1gB. L+μk（m1+m2）gC. L+μkm2gD. L+μk（m1m2m1+m2）g
9. A and B are placed on a smooth horizontal plane and connected by light spring A and B are placed on a smooth horizontal plane and connected by a light spring. Now, the opposite horizontal forces F1 and F2 are applied to a and B respectively, and F1 = 20n and F2 = 10N Spring force If there is only F1, what is the spring force?
10. There is an object with mass m = 1kg hanging on the spring. Under the following conditions, what is the indication of the spring scale? (g = 10m / S ^ 2) (1) The velocity is 5 m / s (2) At the acceleration of a = 5m / S ^ 2, the vertical acceleration rises (3) The acceleration of a = 5 m / S ^ 2 is used to accelerate the descent (4) The acceleration of gravity g is used to decelerate and rise vertically
11. A and B objects are stacked on the horizontal table, as shown in the figure. The friction coefficient between B and the table is 0.4, and the mass of the two objects is Ma = 2kg and MB = 3kg respectively. When B is pulled by 30n horizontal force F, AB does not produce relative sliding, so the friction force on a is calculated
12. It is known that the dynamic friction coefficient between the block and the table is 0.2, and the maximum static friction between the block and the table is 5 N. Two horizontal forces f '= 10N and f' '= 6N are applied on the block (1) Find the size and direction of the friction force on the block (2) If the external force F 'is removed, what is the magnitude and direction of the friction force on the block?
13. The object with mass m = 2kg is still on the horizontal plane, and the dynamic friction coefficient between them is μ = 0.5. Now, the force F, f = 10N, θ = 37 ° as shown in the figure is applied to the object. After t = 10s, the force F is removed, and after a period of time, the object is still again (1) The acceleration of an object when accelerating (2) what is the maximum velocity in the process of the object moving (3) what is the total displacement of the object moving? (g = 10m / S2)
14. As shown in the figure, the mass of the inclined plane is m, the inclination angle is θ, and the dynamic friction coefficient between the inclined plane and the horizontal plane is μ. A small ball with mass of M is suspended vertically by a string and is still on a smooth inclined plane. When the rope is burned, at least how much horizontal force to the right is used to pull the inclined plane from the rest, so that the ball can freely fall to the ground?
15. AB is 1 / 4 circular arc track, radius r = 0.8m, BC is horizontal track, length s = 3M, friction coefficient at BC is u = 1 / 15, there are objects with mass m = 1kg AB is a 1 / 4 circular arc orbit with radius r = 0.8m, BC is a horizontal orbit with length s = 3M, and the friction coefficient at BC is u = 1 / 15. Now an object with mass m = 1kg slides down from point a to point C just stops. How much work does the resistance on the object in AB section of the orbit do?
16. The ball with a mass of 1kg is put on the slash, and the angle between the slash and the horizontal direction is 30 degrees. The dynamic friction factor between the ball and the rod is root 3 / 6. When the ball is subjected to vertical upward F, it accelerates along the rod with an acceleration of 2m / S2 to calculate the vertical upward tension F
17. As shown in the figure, a small ball with a mass of 1kg passes through a fixed straight rod. The angle between the rod and the horizontal direction is 30 degrees. The dynamic friction coefficient between the ball and the rod is μ = 36. When the ball is subjected to a vertical upward tension f = 20n, what is the acceleration of the ball sliding along the rod? （g=10m/s2）
18. As shown in the figure, the ball with a mass of 1kg is put on a fixed straight rod, and the rod is pressed at an angle of 30 degrees with the horizontal direction. The dynamic friction factor between the ball and the rod is u = 2 As shown in the figure, a small ball with a mass of M = 1kg is put through a fixed straight rod, and the rod is pressed at an angle of 30 degrees with the horizontal direction. The dynamic friction factor between the ball and the rod is u = one-third of the root of 2, and the vertical upward pull force of the small ball player is f = 20n. Then the acceleration of the small ball sliding along the rod is
19. Put an object with a mass of 1kg on a horizontal plane, use 8N horizontal pulling force to make the object move from rest, the dynamic friction coefficient between the object and the horizontal plane is 0.2, and remove the pulling force when the object moves for 2S. (G is taken as 10m / S2) calculate: (1) the kinetic energy of the object at the end of 2S. (2) the maximum distance that the object can slide forward on the water plane after 2S
20. The dynamic friction coefficient between the object with mass m = 1kg and the horizontal plane is 0.5. Under the action of horizontal tension f = 10N, the object starts to move from static state, and (1) the object passes through 2.5m If the horizontal pulling force is removed when the object passes through 2.5m, how far can the object move