The mass is m = 10kg, and the flatbed truck is long enough. On the smooth horizontal plane, a small car is placed at the left end, M = 1kg, and u = 0.2 When the speed of the trolley to the ground is 10m / s, calculate the speed of the trolley
I think the conservation of momentum should be used in this problem
This is because it's stationary on a smooth horizontal plane, P = 0
m x 10 + M x V=P
Substituting data
So v = - 1m / s
RELATED INFORMATIONS
- 1. The mass of a is 5kg, the mass of B is 10kg, and the gravity of B is calculated
- 2. What is the gravity of an object with a mass of 10kg______ N. The direction of gravity is always the same______ Yes
- 3. An object with a mass of 10kg. Its gravity is about_ N. The direction of gravity is
- 4. The object with mass m of 10kg, on the horizontal ground, under the action of horizontal pulling force F 1 of 20n, moves along the horizontal ground with uniform speed and straight line An object with a mass of 10kg, m, is placed on the horizontal ground. Under the action of the horizontal pulling force F1 of 20n, the object moves in a straight line at a constant speed along the horizontal ground. If the object still moves in a straight line at a constant speed by using the pulling force F2 which is inclined upward at an angle of 37 degrees to the horizontal direction, the size of F2 is______ The dynamic friction coefficient between the object and the horizontal ground is_____ .(cos37°=0.8)
- 5. The mass of object a is 10kg, and the dynamic friction function between object a and the ground is μ = 0.2 The mass of object a is 10kg. When it is placed on the horizontal ground, the dynamic friction function between object a and the ground is μ = 0.2. If it is pulled by a force with an angle of 30 ° to the horizontal, how large is F needed to produce an acceleration of 1m / S2 (G = 10m / S2)?
- 6. An object originally standing on the horizontal ground, with a mass of 10kg From a certain moment, the object is subjected to a constant force of 20n along the horizontal direction. The dynamic friction coefficient between the object and the horizontal ground is known to be 0.10. Calculate the acceleration of the object and the velocity at the end of 5.0s during the motion. (G is taken as 10m / S2)
- 7. When an object with a mass of 10kg is placed on the horizontal ground, the dynamic friction coefficient between the object and the ground is 0.2 50N, the direction is 37 ° to the horizontal, and the object is pulled upward obliquely for 10m Calculate: the kinetic energy of the object when it moves to 10m position. (g takes 10m / S2; sin 37 ° = 0.6; Cos 37 ° = 0.8) Answer: 260 J To find the process,
- 8. A compressed spring is placed between the car and the wall. When the thin wire is burned by fire, we can see the phenomenon that
- 9. A spring is fixed at the top of the smooth slope, and the object slides to the right and rushes to the slope fixed on the ground. Suppose that the speed of the object at the lowest point a of the slope is V, and the spring is compressed Spring When it comes to point C, the spring is the shortest, and the height from point C to the ground is h, then how much work does the spring force do in the process from a to C? The answer is - 1 / 2mV ^ 2 = - MGH + W, but I want to use - 1 / 2mV ^ 2 = - mgh-w bullet. In the question, w bullet does negative work, so it's listed. If I move the term to find w, I will get a different formula from the answer (just opposite to each other). Where's my question?
- 10. When a moving object contacts a stationary object with a spring, why is the spring compression maximum when two objects have the same speed
- 11. When a car with mass m and length a moves from one end of the flatbed car with mass m and length B to the other end, what are the displacements of the car and flatbed car
- 12. As shown in the figure, there is a flat car with length x = 1m and mass m = 10kg, which is still on a smooth horizontal plane. A small block with mass m = 4kg is placed at one end of the car. The dynamic friction coefficient between the block and the car is μ = 0.25. To make the block move to the other end of the car in 2S, what is the horizontal force F acting on the block? (g = 10m / S2)
- 13. On the smooth horizontal plane, a car B with mass m = 2kg is at rest, and there is a linear track with length L = 1m on the upper surface of the car At present, a small block a with mass m = 1kg slides onto the left end of car B at speed v = 5m / s, and the dynamic friction coefficient between block a and the horizontal track of car B is 0.3? The main question is (2) the formula MV = mvm-mv1 ① 1 / 2mV ^ 2 = 1 / 2mvm ^ 2-1 / 2mV ^ 2-umgl ② these two formulas are listed by me, but in the answer, the formula ② is 1 / 2mV ^ 2-umgl = 1 / 2mvm ^ 2 + 1 / 2mV ^ 2, why? What's wrong with my formula?
- 14. On the smooth horizontal plane, there is a flat car with a length of 10m and a mass of M = 1kg. There is a small block with a mass of M = 1kg at the left end of the car. The small block is given an initial speed. After a period of time, the block does not fall from the car, and the total speed is 5m / s. The initial speed and dynamic friction factor are calculated
- 15. The dynamic friction coefficient between the vehicle and the road surface is u, and the radius of a road corner is R (assuming that the maximum static friction is equal to the sliding friction, g = 10 / M / s ∧ 2, q) 1 / assuming that the road surface is level, in order to ensure that the car does not slip when turning, how much speed can the car not exceed If the road surface at the turning point of the highway is designed to be high on the outside and low on the inside, so that the road surface and the horizontal plane form an angle of X, at what speed can the car turn, so that there is no friction between the car and the road surface in the radial direction
- 16. Is the static friction force between the car and the ground equal to the weight of the car itself?
- 17. Is the friction of the car moving on the horizontal plane sliding friction or static friction?
- 18. Does static friction do work When a car is subjected to static friction, how does the force do work?
- 19. The automobile engine is connected with the rear wheel through the transmission. When the automobile moves forward from standstill, the direction of friction between the front wheel and the rear wheel is () A. The friction of the front wheel is forward, the friction of the rear wheel is backward B. the friction of the front wheel is backward, the friction of the rear wheel is forward C. the friction of the front and rear wheels are backward D. the friction of the front and rear wheels are forward
- 20. When a car turns off the engine and rushes up a slope, the direction of friction between the slope and the car will change xiexiele