The volume of 282.6cm cuboid iron block is melted and cast into a conical machine part with a bottom radius of 6cm

Height of cylinder = 282.6 × 3 ^ (3.14 × 6 & # 178;) = 7.5 (CM)

RELATED INFORMATIONS

1. The bottom diameter of a cylindrical steel is 8cm and the length is 90cm. How many cm is the height of a cylindrical machine part with a bottom diameter of 20cm Formula
2. The diameter of a cylindrical steel bottom is 8cm, and the length is 90cm. Make it into a cylindrical machine with the diameter of 20cm What's the height of the piece
3. A cylindrical steel bottom diameter 8 cm long 90 cm, cast it into a bottom diameter 20 cm cylindrical machine parts, this machine parts height is how many cm? There are formulas, there are gains
4. A cuboid steel is melted and cast into a machine part, which is composed of equal bottomed cylinder and cone. It is known that the ratio of cuboid bottom area to cylinder bottom area is 2:3, and cuboid height is 6cm. If the height of both cylinder and cone is the whole centimeter, then the minimum height of the part is
5. A cylindrical iron block, with a bottom area of 12.56 square centimeters and a height of 5 centimeters, is cast into a cone part with a bottom area of 31.4 square centimeters What is the height of the part in centimeters
6. The volume of a cone is 25.12 cubic centimeters, the bottom area is 12.56 square centimeters, and its height is () A. 2 cm B. 5 cm C. 6 cm
7. A cube iron block with an edge length of 6 decimeters is forged into a cuboid part with a bottom area of 15 square decimeters. What is the height of the part?
8. Cast a cylindrical steel block with a bottom area of 35 square centimeters and a height of 8 centimeters into a conical part with a height of 15 centimeters. What is the bottom area of this part?
9. A cylindrical part with a bottom radius of 1 decimeter and a height of 2 decimeters is forged into a cuboid with a height of 4 decimeters, and the area of the cuboid is calculated
10. A rectangular iron block with a base area of 64 square centimeters and a height of 4 centimeters is forged into a rectangle with a square section The side length of the cross section is 5cm. What is the length of the forged cuboid [the loss is ignored]
11. The volume is 282.6 cubic centimeter rectangular iron block is melted and cast into a cylindrical machine part with a bottom radius of 6cm. What is the height of the conical part?
12. The length of a machine part is 0.8 cm. On a 40:1 scale drawing, how long is it?
13. Scale: a machine part is 4mm long and 8cm long on the drawing. What is the scale of this drawing?
14. The length of a machine part is 0.5cm. What is its length on a 40:1 scale drawing?
15. There is a machine part that is 1.5mm long and 6cm long in the figure. The scale of this figure is ()
16. The volume of a cylinder is 6.28 cubic decimeters larger than that of a cone with the same height as its bottom. It is known that the radius of the bottom of a cone is 1 decimeter, and the height of a cone is 1______ Decimeter
17. The diameter of the bottom of a cylinder is 2 decimeters, and the side expansion is just a square. The volume of the cylinder is () cubic decimeters
18. Expand the side of a cylinder to get a square with side length of 6.28 decimeters. The volume of the cylinder is () cubic decimeters A. 2B. 2πC. 19.7192
19. There is a cylinder machine part with a height of 6.28 cm, and its side is just a square. Find the surface area of the part
20. Cast a 282.6 cubic centimeter iron block into a conical machine part with a bottom radius of 6cm, and calculate the height of the conical part? (π = 3.14)