When the cube A and cube B are placed on the horizontal table, their pressure on the table is equal, and the ratio of pressure is 9:4, then the ratio of density of cube A and cube B is () A. 2:3B. 3:2C. 1:1D. 4:9
F1s1 = f2s2 ﹣ F1F2 = S1S2 = 94 ﹣ L1L2 = 32 ﹣ V1V2 = 278, F1F2 = m1m2 = 94 ﹣ ρ 1 ρ 2 = m1v1m2v2 = 92748 = 23
RELATED INFORMATIONS
- 1. If the pressure of the two solid cubes on the horizontal ground is F1 and F2 respectively, then () A. F1 = f2b. F1 < F2C. F1 > F2D
- 2. Cube a with a side length of 10 cm is placed on a horizontal table of 0.1 cm2, and the pressure on the table is 2000 PA?
- 3. Place a square block with a mass of 25kg and a side length of 10cm in the center of a horizontal table with an area of 1m2. What is the pressure of the block on the table? What is the pressure Pa? If the object is cut half in the vertical direction, what is the pressure of the remaining part on the table? (G is 10N / kg)
- 4. A cube with a side length of 8 cm is placed on the ground of 100 square cm. Its pressure on the ground is 6.125 × 10 to the third power. The density of this solid body is?
- 5. A cubic rubber clay with side length of 10cm and density of 1.5x10 cubic kg / m3 is immersed in water to drain the volume of water For (), the mass of the boiled water is (), the gravity of the boiled water is (), the buoyancy of the plasticine is (). If the plasticine is made into a boat and floats on the water, the buoyancy received by Ogawa is (), the volume of the boiled water is () Good answer + 20
- 6. The weight of an elephant is 6x10 cubic kg, and the area of each foot is about 600cm & sup2 1. Find the gravity of the elephant 2. If the elephant raises one leg, calculate its pressure on the ground (G is 10N / kg)
- 7. An elephant weighs 6000 kg, with an area of 600 square centimeters per foot. The pressure of his four feet on the ground? G = 10 N / kg
- 8. As shown in the figure, the amphibious infantry combat vehicle has a mass of 22T and a total track landing area of 4m2. (g = 10N / kg, ρ water = 1.0 × 103kg / m3) (1) what is the pressure of the vehicle on the horizontal ground? (regardless of the mass of the person on the tank) (2) the tank has the function of hitting the target and transporting on the water. In a water drill, the volume of water discharged by the tank is 23 m3. What is the buoyancy of the tank? (3) In this water exercise, the pressure of water on the chariot is 1.5 × 104pa. What is the depth of this place?
- 9. If the mass of the bulldozer is 1.8 times 10 to the fourth power kg, and the track landing area is 2.4m square, the pressure of the bulldozer on the horizontal ground is 0
- 10. The rated power of the engine is 120km. The mass is 1.5 times 10 to the fourth power kg. The contact area between each track and the ground is 1.25m square. (g = 10N / kg)
- 11. When the cube A and cube B are placed on the horizontal table, their pressure on the table is equal, and the ratio of pressure is 9:4, then the ratio of density of cube A and cube B is () A. 2:3B. 3:2C. 1:1D. 4:9
- 12. When the cube A and cube B are placed on the horizontal table, their pressure on the table is equal, and the ratio of pressure is 9:4, then the ratio of density of cube A and cube B is () A. 2:3B. 3:2C. 1:1D. 4:9
- 13. The two cubes A and B are placed on the horizontal table top. Their pressure on the table top is equal. If the pressure ratio is 4:9, what is the density ratio of a and B
- 14. If the pressure P of three solid cubes placed flat on the horizontal table has a certain density P1 > P2 > P3, then the relationship between the pressure f is? The process is as follows
- 15. A cubic wood block with density of 0.6 * 10 ^ 3kg / m3 and side length of 10cm was immersed in water If the maximum tension that the rope can bear is 3N (G is 10N / kg) Inject water into the container (the water does not overflow until the water stops immediately before the rope breaks). At this time, the volume of the wood block immersed in the water is
- 16. A cube wood block with density of 0.6 × 103kg / m3 and edge length of 10cm was pulled by a rope and immersed in water to calculate the tensile force on the wood block
- 17. There is a cubic block of wood with density of 0.6 * 10 ^ 3kg / m3 and side length of 10cm immersed in water, as shown in the figure. If the pulling force on the block is 39.2n, the floating force on the block can be calculated The picture shows: a piece of wood suspended in water, 5cm away from the liquid level (in three ways)
- 18. A cube wood block with density of 0.6 × 103kg / m3 and edge length of 10cm is pulled by rope and immersed in water Please do not copy and paste
- 19. A cube wood block with a density of 0.6 × 10 ᦉ kg / m ᦉ 179; and a side length of 10 cm is still on the water surface (1) The gravity on the block (2) Buoyancy of wood block (3) At least how much force must be applied on the surface of the block to make it completely immersed in water. (g = 10N / kg)
- 20. The homogeneous cube wood block with side length of 10 cm is still on the water surface, and its lower surface is 8 cm (g = 10 N / kg) from the water surface?