A cube with a side length of 8 cm is placed on the ground of 100 square cm. Its pressure on the ground is 6.125 × 10 to the third power. The density of this solid body is?
First, the cubic power of his pressure is 6.125 × 10 * 8 * 8 square centimeter
=The cubic power of 6.125 × 10 * the negative cubic square meter of 6.4 * 10
=3.92*10N
His weight is 39.2n/10 = 3.92kg
We're looking for a density of 3.92 kg / 8 * 8 * 8 cubic centimeter
=3.92 / 5.12 * 10
=7656.25
RELATED INFORMATIONS
- 1. A cubic rubber clay with side length of 10cm and density of 1.5x10 cubic kg / m3 is immersed in water to drain the volume of water For (), the mass of the boiled water is (), the gravity of the boiled water is (), the buoyancy of the plasticine is (). If the plasticine is made into a boat and floats on the water, the buoyancy received by Ogawa is (), the volume of the boiled water is () Good answer + 20
- 2. The weight of an elephant is 6x10 cubic kg, and the area of each foot is about 600cm & sup2 1. Find the gravity of the elephant 2. If the elephant raises one leg, calculate its pressure on the ground (G is 10N / kg)
- 3. An elephant weighs 6000 kg, with an area of 600 square centimeters per foot. The pressure of his four feet on the ground? G = 10 N / kg
- 4. As shown in the figure, the amphibious infantry combat vehicle has a mass of 22T and a total track landing area of 4m2. (g = 10N / kg, ρ water = 1.0 × 103kg / m3) (1) what is the pressure of the vehicle on the horizontal ground? (regardless of the mass of the person on the tank) (2) the tank has the function of hitting the target and transporting on the water. In a water drill, the volume of water discharged by the tank is 23 m3. What is the buoyancy of the tank? (3) In this water exercise, the pressure of water on the chariot is 1.5 × 104pa. What is the depth of this place?
- 5. If the mass of the bulldozer is 1.8 times 10 to the fourth power kg, and the track landing area is 2.4m square, the pressure of the bulldozer on the horizontal ground is 0
- 6. The rated power of the engine is 120km. The mass is 1.5 times 10 to the fourth power kg. The contact area between each track and the ground is 1.25m square. (g = 10N / kg)
- 7. The height of an iron cylinder is 10cm. What is its pressure on the horizontal ground? (the density of iron = 7.9 * 10 cubic kg / m, g * 10N / kg)
- 8. The density of a brick is 2 × 10 cubic kilogram per cubic meter, the pressure it can bear is 5 × 10 quintic Pascal, and the length, width and height are 24, 12 and 6cm respectively Ask: 1. Put a brick flat on the ground, how much pressure does the ground receive? 2. What is the maximum height that can be built by using this brick to repair a cylindrical chimney? (g = 10 N / kg)
- 9. The density of a certain brick is 2 × 10 cubic kilogram per cubic meter, the pressure it can bear is 5 × 10 quintic Pascal, and the length, width and height of the brick are 3 × 10 cubic kilogram per cubic meter The density of a brick is 2 × 10 cubic kilogram per cubic meter, the pressure it can bear is 5 × 10 quintic Pascal, and the length, width and height are 24, 12 and 6cm respectively What is the maximum height that can be built by using this brick to repair a cylindrical chimney? (g = 10 N / kg) Why H = P / ρ G
- 10. The weight of an elephant is 6 tons, and the area of each foot is 600 CM & sup2;, so when the elephant stands, what is the pressure and pressure on the ground
- 11. Place a square block with a mass of 25kg and a side length of 10cm in the center of a horizontal table with an area of 1m2. What is the pressure of the block on the table? What is the pressure Pa? If the object is cut half in the vertical direction, what is the pressure of the remaining part on the table? (G is 10N / kg)
- 12. Cube a with a side length of 10 cm is placed on a horizontal table of 0.1 cm2, and the pressure on the table is 2000 PA?
- 13. If the pressure of the two solid cubes on the horizontal ground is F1 and F2 respectively, then () A. F1 = f2b. F1 < F2C. F1 > F2D
- 14. When the cube A and cube B are placed on the horizontal table, their pressure on the table is equal, and the ratio of pressure is 9:4, then the ratio of density of cube A and cube B is () A. 2:3B. 3:2C. 1:1D. 4:9
- 15. When the cube A and cube B are placed on the horizontal table, their pressure on the table is equal, and the ratio of pressure is 9:4, then the ratio of density of cube A and cube B is () A. 2:3B. 3:2C. 1:1D. 4:9
- 16. When the cube A and cube B are placed on the horizontal table, their pressure on the table is equal, and the ratio of pressure is 9:4, then the ratio of density of cube A and cube B is () A. 2:3B. 3:2C. 1:1D. 4:9
- 17. The two cubes A and B are placed on the horizontal table top. Their pressure on the table top is equal. If the pressure ratio is 4:9, what is the density ratio of a and B
- 18. If the pressure P of three solid cubes placed flat on the horizontal table has a certain density P1 > P2 > P3, then the relationship between the pressure f is? The process is as follows
- 19. A cubic wood block with density of 0.6 * 10 ^ 3kg / m3 and side length of 10cm was immersed in water If the maximum tension that the rope can bear is 3N (G is 10N / kg) Inject water into the container (the water does not overflow until the water stops immediately before the rope breaks). At this time, the volume of the wood block immersed in the water is
- 20. A cube wood block with density of 0.6 × 103kg / m3 and edge length of 10cm was pulled by a rope and immersed in water to calculate the tensile force on the wood block