Here is an expanded view of a cuboid, calculating its surface area and volume

The cuboid is 8 decimeters long, 4 decimeters high and 10-4 = 6 decimeters wide
The surface area is
(4 × 6 + 4 × 8 + 6 × 8) × 2 = 208 square decimeters
The volume is 8 × 4 × 6 = 192 cubic decimeters

As shown in the figure is the expansion of a cuboid, calculate the surface area and volume of the enclosed cuboid. (unit: decimeter)

The cuboid has a length of 8 decimeters, a width of 10-4 = 6 decimeters, a height of 4 decimeters, a surface area of 8 × 6 × 2 + 8 × 4 × 2 + 6 × 4 × 2 = 96 + 64 + 48 = 208 (square decimeters), and a volume of 8 × 6 × 4 = 192 (cubic decimeters)

The picture on the right is an expanded view of a rectangular carton. Measure the relevant data and calculate its volume and surface area

Where is the picture

RELATED INFORMATIONS

1. The following is an expanded view of a cuboid carton. Please calculate the surface area of the cuboid carton. (unit: cm)
2. If the height of a cylinder is shortened by 3cm, the surface area will be reduced by 94.2cm, the radius of its bottom will be reduced, and the volume will be reduced
3. If the height of a cylinder is reduced by 2 cm, the surface area will be reduced by 50.24 square cm. If the height of a cylinder is 5 cm, what is its volume? Why
4. A 10 cm high cylinder is sawed into two equal blocks along the diameter from the middle. The surface area is 80 square centimeters larger than the original. What is the diameter and volume of the cylinder
5. Take a cylinder 8 cm high and cut it into two and a half cylinders along its diameter. The surface area is increased by 96 square centimeters. Calculate the surface area of the original cylinder Although the score is low, everyone answers
6. If the side area of a cylinder is 50.24 square centimeter and the height is equal to the bottom radius, what is the surface area?
7. If the height of a cylinder is reduced by 2 cm, its surface area will be reduced by 50.24 square cm. The diameter of the bottom surface of the cylinder is ()?
8. A cylindrical steel with a circumference of 12.56 cm at the bottom and a height of 125 cm is cast into a square steel with a cross section of 10 cm at the side
9. To cast a cone with a bottom diameter of 40 cm and a height of 15 cm, it is necessary to cut off a cylinder with a bottom diameter of 10 cm
10. The height of a cylinder is equal to the circumference of its bottom surface. The side of the cylinder expands along the height and is a () shape. If the height is 31.4cm, then the cylinder is a () shape The product is () and the volume is ()
11. This is an expanded view of a cuboid carton. What is the volume of the carton?
12. A rectangular cardboard cut shadow according to the figure, just can make a cylinder, calculate the surface area of the cylinder I drew the wrong circle, which is the same size
13. The following is a rectangular cardboard, cut the shadow part according to the figure, just can make a cylinder. Calculate the surface area of the cylinder Don't use π solution, don't use equation, seek explanation. It doesn't matter if the formula is longer
14. Calculate the surface area and volume of cylinder (unit: cm) & nbsp;
15. For a straight cylinder, the perimeter of the side view is 8 π cm. The ratio of the radius of the high and low sides of the cylinder is 2 π: 1. What is the volume of the cylinder?
16. A cylinder is a square with a side length of 62.8 cm. What's the surface area of the cylinder?
17. 1. The side expansion of a cylinder is a square with a side length of 3.14 decimeters. What is the radius of the bottom of the cylinder
18. The side view of a cylinder is just a square with a side length of 18.84 cm. Its bottom radius is () cm, and its height is () cm?
19. The diameter of the bottom surface of a cylinder is 4cm. Cut the cylinder vertically into two equal rectangles, and increase the surface area by 64 square cm. Calculate the side area of the cylinder
20. A 20 cm long cylinder is cut into two small cylinders of the same size, and the surface area is increased by 40 cm square. What is the volume of the original cylinder?