Sawing a 2-meter-long cuboid wood into three sections will increase its surface area by 16 square meters. How many cubic meters is the original volume of this wood?
The surface area is increased by four bottom surfaces, that is, the area of each bottom surface is 16 / 4 = 4 square meters, so the volume is equal to 4 * 2 = 8 cubic meters
RELATED INFORMATIONS
- 1. After sawing a 1-meter-long rectangular timber into two sections, its surface area increases by 0.5 square meters. What is the volume of this timber in cubic meters? Urgent~ If you want a picture, I'll send it to you..
- 2. The bottom of a 2.5-meter-long cuboid wood is square. After sawing the wood into two sections, the surface area increases by 0.18 square meters. The volume of the original wood can be calculated Can we not use the equation? Better not use the equation
- 3. The bottom of a 1.5-meter-long cuboid wood is square, and the bottom remains unchanged. After sawing the wood into two cuboids, the surface area increases by 0.18 square decimeter, which is the same as the original one What is the surface area of the wood?
- 4. A cuboid is 5m in length and 3M in width. The area of its largest surface is () m, the area of its smallest surface is () m, and the surface area is () M
- 5. A cuboid wood with a square bottom is 5 meters long. Cut it into 4 sections and increase its surface area by 36 square meters. What's the volume of this cuboid wood?
- 6. A cuboid wood with a square bottom is 5 meters long. Cut it into 4 sections and increase its surface area by 36 square meters. What's the volume of this cuboid wood?
- 7. With 50 pieces of the same square wood, pile up a cuboid 2 cm long, 1.5m wide and 1.2m high. What is the average volume of each square wood? How many cubic decimeters?
- 8. 40 pieces of the same square wood can be piled into a cuboid 30 decimeters long, 20 decimeters wide and 15 decimeters high. How many cubic decimeters is the average volume of each square wood?
- 9. Cylinder: r = 2m, H = 1.5m, calculate the surface area and volume
- 10. A cuboid fish pond is 8m long, 4.5m wide and 2m deep. What is the volume of the pond? A cuboid fish pond is 8m long, 4.5m wide and 2m deep. What is the volume of the pond?
- 11. A cuboid wood is 5 meters long. After sawing it into two sections, the surface area increases by 40 square decimeters. How many cubic meters is the original volume of this wood
- 12. Divide the 5-meter-long rope into 4 sections, and each section is the length of the rope___ Each paragraph is___ Rice
- 13. A 400 cm long cylindrical steel is cut into two sections on average, and the surface area is increased by 15.7 square centimeters. The volume of each section of steel after cutting is calculated
- 14. A cylindrical steel is 1.5m long, cut into three sections, and the surface area increases by 100.48 square centimeters. What is the volume of the original steel? What is the bottom area?
- 15. A cylindrical steel is 1.5 meters long. After it is cut into three small columns, the surface area increases by 100.48 square centimeters. What is the volume of the original steel? Use the formula to solve the problem
- 16. In order to welcome the national day, an environmental protection department of our city wants to inject the full wastewater from a rectangular waste water tank with a length of 2 × 10 ~ 3 DM, a width of 4 × 10 ~ 3 DM and a height of 8 × 10 ~ 2 DM into a cube water tank for purification, Can there be a cube storage tank to fill the waste water? If there is, find out the edge length of the cube storage tank. If not, explain the reason
- 17. A truck full of goods is 2.5m in height and 1.6m in width. The upper part of a factory door is semicircle (2m in diameter) and the lower part is rectangle (2.3m in height and 2m in width)
- 18. The volume of the cylinder is 80 m & sup 3; and the height is 6 m. what is the diameter of the cylinder?
- 19. A cuboid iron block with a length of 8cm, a width of 7cm and a height of 6cm and a cube iron block with an edge length of 5cm are melted into a cylinder with a diameter of 20cm. What is the height of the cylinder? (accurate to 0.01cm)
- 20. Given the volume of the cylinder, the diameter and height of the cylinder are required to be equal?