The volume of the cylinder is 80 m & sup 3; and the height is 6 m. what is the diameter of the cylinder?
Bottom area of cylinder = 80 / 6 = 40 / 3 M2
Diameter = 2 * radical (40 / 3) / Pie = 4.12m
RELATED INFORMATIONS
- 1. A truck full of goods is 2.5m in height and 1.6m in width. The upper part of a factory door is semicircle (2m in diameter) and the lower part is rectangle (2.3m in height and 2m in width)
- 2. In order to welcome the national day, an environmental protection department of our city wants to inject the full wastewater from a rectangular waste water tank with a length of 2 × 10 ~ 3 DM, a width of 4 × 10 ~ 3 DM and a height of 8 × 10 ~ 2 DM into a cube water tank for purification, Can there be a cube storage tank to fill the waste water? If there is, find out the edge length of the cube storage tank. If not, explain the reason
- 3. A cylindrical steel is 1.5 meters long. After it is cut into three small columns, the surface area increases by 100.48 square centimeters. What is the volume of the original steel? Use the formula to solve the problem
- 4. A cylindrical steel is 1.5m long, cut into three sections, and the surface area increases by 100.48 square centimeters. What is the volume of the original steel? What is the bottom area?
- 5. A 400 cm long cylindrical steel is cut into two sections on average, and the surface area is increased by 15.7 square centimeters. The volume of each section of steel after cutting is calculated
- 6. Divide the 5-meter-long rope into 4 sections, and each section is the length of the rope___ Each paragraph is___ Rice
- 7. A cuboid wood is 5 meters long. After sawing it into two sections, the surface area increases by 40 square decimeters. How many cubic meters is the original volume of this wood
- 8. Sawing a 2-meter-long cuboid wood into three sections will increase its surface area by 16 square meters. How many cubic meters is the original volume of this wood?
- 9. After sawing a 1-meter-long rectangular timber into two sections, its surface area increases by 0.5 square meters. What is the volume of this timber in cubic meters? Urgent~ If you want a picture, I'll send it to you..
- 10. The bottom of a 2.5-meter-long cuboid wood is square. After sawing the wood into two sections, the surface area increases by 0.18 square meters. The volume of the original wood can be calculated Can we not use the equation? Better not use the equation
- 11. A cuboid iron block with a length of 8cm, a width of 7cm and a height of 6cm and a cube iron block with an edge length of 5cm are melted into a cylinder with a diameter of 20cm. What is the height of the cylinder? (accurate to 0.01cm)
- 12. Given the volume of the cylinder, the diameter and height of the cylinder are required to be equal?
- 13. The radius of a circular fish pond is 12 meters, and there is a circular island with a diameter of 10 meters in the middle. How many square meters is the water surface area of this fish pond
- 14. The diameter of a circular fish pond is 36 meters, and there is a circular island in the middle with a diameter of 8 meters. What is the surface area of the fish pond
- 15. The diameter of a circular fish pond is 8 meters, and there is a circular island with a diameter of 6 meters in the middle. How many square meters is the water surface area of this fish pond
- 16. The surface area of two and a half cylinders is 32 square centimeters larger than that of the original cylinder, The problem is to find the surface area and volume of one of the cylinders
- 17. Cut a cylinder with a circumference of 28.26 cm and a height of 10 cm into two and a half cylinders along the diameter of the bottom. How much has the surface area of the two and a half cylinders increased
- 18. Find the surface area of the cylinder 1. The radius of the bottom is 5 decimeters, and the height is 4 decimeters 2. The perimeter of the bottom is 12.56 meters, and the height is 3 meters
- 19. The circumference of the bottom surface is 18.84 decimeters and the height is 7 decimeters
- 20. The side area of a cylinder is 200 square centimeters, the bottom radius is 3 centimeters, the surface area of the cylinder is (), and the volume is ()