![](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" viewBox="0 0 72 71" width="72"></svg>)
The strength, hardness, plasticity and toughness of 45 steel, T8 steel and T12 steel were compared under annealing condition. I hope you can answer my question as soon as possible!
T8 steel grade, because it is tool steel, comprehensive mechanical properties requirements are OK,45# steel needless to say, its mechanical properties are very general, T12 seems to be used on the scalpel, very sharp, high hardness, of course toughness is poor, brother next time to reward oh!
T8 steel grade, because it is tool steel, the comprehensive mechanical property requirements are OK,45# steel needless to say, its mechanical property is very general, T12 seems to be used on the scalpel, very sharp, high hardness, of course toughness is poor, brother next time to reward oh!
The higher the carbon content, the higher the strength and hardness of the steel, the plasticity and toughness of the steel, especially after heat treatment
Relatively speaking, even higher is cast iron, within the allowable value of steel, correct!
RELATED INFORMATIONS
- 1. Is it that the higher the carbon content of steel, the higher the strength and hardness, the lower the toughness and plasticity
- 2. What is the effect of carbon, sulfur and phosphorus on the properties of steel?
- 3. Chemical composition content of Q235B carbon steel plate Content range of C, Mn, Si, P and S
- 4. Chemical equation of phosphorus combustion in air
- 5. Write the chemical equation for the combustion of carbon, sulfur, phosphorus, and iron in oxygen! Write the chemical equation for the combustion of carbon, sulfur, phosphorus, and iron in oxygen!
- 6. What is the effect of carbon content on the mechanical properties of steel? What is the effect of Mn, Si, S, P on the properties of steel?
- 7. What is the effect of carbon content on the properties of steel?
- 8. What is the effect of carbon, manganese, sulfur and phosphorus on the mechanical properties of carbon structural steel
- 9. The bleaching principle of Na2O2(sodium peroxide)? And the bleaching principle of sodium hypochlorite? The bleaching principle of Na2O2? And the bleaching principle of sodium hypochlorite?
- 10. To prepare 500 mL of 0.5 mol copper sulfate solution,62.5 g of gallstone is required. To prepare 500 mL of 0.5 mol copper sulfate solution,62.5 g ofiliary alum is required.
- 11. What is the carbon content of Q235 steel?
- 12. Effect of Carbon Content on Room Temperature Equilibrium Microstructure of Fe-C Alloy
- 13. What is the effect of carbon content on iron-carbon alloys?
- 14. Why in iron-carbon alloy, when the carbon content exceeds 0.8%, the hardness of steel increases continuously, but the strength decreases obviously Why in iron-carbon alloys, when the carbon content exceeds 0.8%, the hardness of the steel continues to increase the strength decreases obviously
- 15. Approximate Regularity of Influence of Carbon Content on Microstructure and Properties of Fe-C Alloy
- 16. What material conforms to this chemical composition: carbon 0.03%, silicon 0.05%, sulfur 0.006%, aluminum 0.037%, manganese 0.23%, phosphorus 0.016%
- 17. What is a material containing 0.20 carbon,0.94 silicon,8.3 manganese,0.08 phosphorus,0.01 sulfur,11.7 chromium,0.82 copper,0.08 vanadium What is a material containing 0.20 C,0.94 Si,8.3 Mn,0.08 P,0.01 S,11.7 Cr,0.82 Cu,0.08 V
- 18. Consider the following equation:39×41=402-12,48×52=502-22,56×64=602-42,65×75=702-52,83×97=902-72... Please write the pattern of discovery in letters: m•n=______.
- 19. At a certain temperature, when 100 g of A solution is evaporated off 20 g of water and 4 g of crystal is precipitated at a constant temperature, if 10 g of water is evaporated off and 3 g of crystal is precipitated, what is the solubility at this temperature? At a certain temperature, when 100 g of A solution is evaporated off 20 g of water and 4 g of crystal is precipitated at a constant temperature, if another 10 g of water is evaporated off and 3 g of crystal is precipitated, what is the solubility at this temperature?
- 20. What are the main methods for strengthening the mechanical properties of metal materials and the meaning of one of them