How are the capacitance units f farad, MF nanofa, NF nanofa, PF Pico FA converted?

The commonly used capacitance units are milli method (MF), micro method (μ f), nano method (NF) and PI method (PF)
1 farad (f) = 1000 MA (MF) = 1000000 micro fa (μ f)
1 μ f = 1000 nm (NF) = 1000000 PF

RELATED INFORMATIONS

1. In RT △ ABC, the angle ACB = 90 °, CD ⊥ AB in D, ab = 13cm, the sum of AC and BC is equal to 17cm
2. In the RT triangle ABC, the angle c is equal to 90 degrees, ab = 13cm, BC-AC = 7cm
3. The vertex of quadratic function y = AX2 + BX + C is represented by ABC!
4. As shown in the figure, four points a, F, C and D are known to be on the same straight line, AF = CD, ab ‖ BC and ef ‖ BC. The formula shows that (1) △ ABC ≌ △ def; (2) angle CBF = angle FEC
5. It is known that a, F, C and D are on the same straight line, AC = DF, ab ‖ De, EF ‖ BC. Try to explain: (1) ABC ≌ def; (2) CBF = FEC
6. As shown in the figure, △ ABC, D, e and F are the points on AB, BC and AC respectively. DF ‖ BC and ef ‖ AB are known. Please add a condition:______ To make △ ADF ≌ FEC
7. If AB = 3 and EF = 4, what is AC equal to?
8. Given that the angle ABC is equal to the angle def, AB is equal to 3, AC is equal to 5, if the perimeter of the angle DEF is even, what is the length of ef?
9. AB: de = BC: EF = CA: FD = 6:5, the difference between the perimeter of triangle ABC and triangle DEF is 4, how much is the perimeter of ABC and def?
10. AB: de = BC: EF = CA: FD = 6:5, the difference between the perimeter of triangle ABC and triangle DEF is 4, how much is the perimeter of ABC and def?
11. The ammeter is refitted into a voltmeter in series with a large resistor to divide the voltage. Why can it become a voltmeter? What is the meaning of the value measured by the ammeter? How to calculate the voltage with this value?
12. Connect two fixed value resistors in series to both ends of the power supply with voltage of u, the power consumed by R1 is P1, and the power consumed by R2 is 3P1 A. The ratio of voltage between R1 and R2 in series is 3:1b. The power consumed by R1 in parallel is 16p1c. The ratio of current through R1 and R2 in parallel is 1:3d. The total power consumed by two resistors in parallel is 163p1
13. The "pz220 & nbsp; 40" bulb works on a 220 volt circuit______ The power consumption per hour is 1 kilowatt hour, and the power of the circuit connected at 110 V is 0______ The rated power is______ Tile
14. The price of type a refrigerator sold in shopping malls is 2190 yuan per unit, and the daily power consumption is 1 degree, while the price of type B energy-saving refrigerator is 10% higher than that of type a refrigerator, but the daily power consumption is 0.55 degree? (calculated according to the service life of 10 years, 365 days per year and 0.40 yuan per kilowatt hour)
15. 1 megohm = how many ohms Is it the sixth power of 10? It's 10 megohm resistance at 100V, and it's 10 megohm resistance at 1V, right?
16. The power supply voltage of the series circuit remains unchanged, and there is a constant resistance R in series in the circuit. In order to slightly increase the indication of the ammeter, it is necessary to give R--- The answer is to parallel a resistor much larger than R. but what is the reason?
17. In a circuit, if the voltage U and resistance R are doubled at the same time, how will the power change
18. What is the role of capacitors and resistors on a circuit board?
19. What is the allowable working current of 2K ohm resistor with rated power of one eighth watt at 12V
20. It is known that the rated power of electric iron is 70W, and the voltage is 220V, I and R are calculated