For some common household appliances rated current and power

For some common household appliances rated current and power


Generally speaking, the TV set is 150W, the air conditioner is 1500W, the electric teapot is 1500W, the computer is 150W, the fluorescent lamp is 40W, the washing machine is 300W, the microwave oven is 1800W, the heat storage electric water heater is 1500W, the fast heating electric heater is 8000w, and the refrigerator is 100W. Of course, the sizes and capacities of various electrical appliances are different, and the power varies greatly. These data are general concepts



For the voltage of 220 V, the electrical equipment is 3000 W and 10000 w respectively. What is the size of the wire and the size of the air switch?


Using 220 V single-phase power supply, if your line is not too long, transmission power is not far away words;
The load of 1.3000w can be equipped with 4 square copper wires, and the air switch can be 20A or 25A
2. 10000 w load with 10 square copper wire is OK, air switch choose 80 a



The wattage of the bulb is 7000 watts, the voltage is 220 V, how much wire should be used


According to the parameters you give, we can calculate: PE = 7kwkx = 0.80cos%% C = 0.85pjs = 5.60kwijs = 29.95a by looking up the table: conductor model = BV, ambient temperature = 25, conductor arrangement mode = laying mode = laying in open laying conduit -------- nominal section ampacity 1.5182.5



A and B bulbs are respectively marked with the words of 220 V, 40 W, 220 V, 60 W, which are connected in parallel with 220 V power supply. The one with high current intensity through the filament is () bulb, filament
If the length of the two bulbs is the same, the thicker tungsten filament is (). If the two bulbs are used for the same period of time, what is the ratio of power consumption of a and B lamps?


If the length of the two bulbs is the same, the thicker tungsten filament is (220 V, 60 W). If the two bulbs are used for the same time, the power consumption ratio of a and B lamps is 2:3