A cuboid tank is 10 meters long, 4 meters wide and 2 meters deep. How many liters of water can it hold at most? How many square meters does it cover?

Volume v = 10x4x2 = 80m & # 179;
80m³=80000L
Floor area s = 10x4 = 40 M2

A cuboid pool is 50 meters long, 20 meters wide and 2.5 meters deep. How many square meters does it cover?

50 × 20 = 1000 square meters of floor area

Normative speaking, the unit of land occupation is mu or square meter, so what about the construction area?

Generally, the domestic area of one mu is 666.66 square meters, and the building surface is directly calculated by square meters. Because one mu is too large, the building area of 120 square meters is not small, so it can't be calculated by 0.2 mu
The area of a small site is also calculated in square meters

What are floor area and building area respectively?

Building area, also known as expanded building area, refers to the sum of the plane area of each floor measured by the exterior wall peripheral line of a residential building. It is an economic indicator of the scale of a building, It refers to the use area, auxiliary area and structural area. The occupied area refers to the area index on the land use certificate obtained by the project. The area of the above ground part in the building area △ occupied area = the plot ratio of the land

What's the difference between floor area and floor area?
A two-story building covers an area of 1500 square meters and a construction area of 5000 square meters,
How did it work out?
Is the roof (hard top) also a building area?
I've seen the rules of building area calculation, but I still can't
1500 * 3 = 4500 is the fence also included?
The building area is calculated according to the horizontal area of the outside wall above the plinth of the building?

1、 The main calculation rules of the national unified building area calculation rules (the regulatory document issued by the State Economic Commission in 1982) are as follows:
Calculate the scope of building area
1. A single story building, regardless of its height, shall be calculated as one story, and its building area shall be calculated as the peripheral horizontal area above the plinth of the external wall of the building. If a single story building has some floors, the building area shall also be calculated
2. For a single-layer building with high and low combined spans, if it is necessary to calculate the building area separately, when the high span is a side span, the building area shall be calculated by multiplying the horizontal length between the external surfaces of the gables at both ends above the plinth by the horizontal width from the external surface above the plinth to the outer boundary line of the middle column of the high span; when the high span is a middle span, the building area shall be calculated according to, The building area is calculated by the horizontal length between the external surfaces of the gables at both ends above the plinth multiplied by the horizontal width of the outer boundary line of the central column
3. The building area of multi-storey building is calculated according to the total building area of each floor, the bottom floor is calculated according to the horizontal area of the outer wall above the plinth of the building, and the second floor and above are calculated according to the horizontal area of the outer wall
4. The building area of basement, semi basement, underground workshop, warehouse, shop, underground headquarters, etc. and corresponding entrances and exits shall be calculated according to the horizontal area of the periphery of the upper exterior wall (excluding lighting well, damp proof layer and its protective wall)
5. The deep foundation is used as the underground overhead floor. If the floor height is more than 2.2M, the building area is calculated as half of the horizontal area of the periphery of the overhead floor
6. For buildings on slope land, if the hanging feet are used as overhead floor and the floor height is more than 2.2M, the building area shall be calculated according to the horizontal area around the enclosure
7. The building area of the passageway through the building, the hall and the hall in the building, regardless of their height, is calculated as one floor. The building area of the corridor in the hall and the hall is calculated as its horizontal projection area
8. The building area of the library's stack room is calculated according to the bookshelf
9. The building area of elevator shaft, lifting shaft, garbage channel and pipe shaft is calculated according to the natural floor of the building
10. The building area of stage lighting control room is calculated by multiplying the horizontal area of surrounding structure by the actual number of floors
If the height of the technical floor in the building exceeds 2.2M, the building area shall be calculated
11. The building area of awning with column is calculated according to the horizontal area of column, and the building area of awning with independent column is calculated according to half of the horizontal projected area of top cover
12. The construction area of car shed and goods shed platform with column is calculated according to the horizontal area of column periphery; the construction area of car shed, goods shed and platform with single row column and independent column is calculated according to half of the horizontal projection area of top cover
13. The building area of staircase, water tank room and elevator room with enclosure structure protruding from the roof shall be calculated according to the horizontal area of enclosure structure periphery
14. For the door bucket protruding from the wall, the building area shall be calculated according to the horizontal area of the surrounding structure
15. The building area of closed balcony and cantilevered corridor is calculated according to their horizontal projection area. The building area of concave balcony and cantilevered balcony is calculated according to half of their horizontal projection area
16. The building area of the corridor and eaves corridor with top cover and column outside the building wall is calculated according to the horizontal area of the outer line of the column. 17. The building area of the corridor and eaves corridor without column is calculated according to half of its projected area
18. The construction area of the overhead corridor with top cover between two buildings is calculated according to the projected area of the corridor. The construction area of the overhead corridor without top cover is calculated according to half of its projected area
19. The building area of outdoor stairs used as main passageways and for evacuation is calculated according to the horizontal projection area of each floor; the building area of outdoor stairs with stairs in the building is calculated according to half of its horizontal projection area
20. The building area of a single storey elevated building crossing other buildings and structures shall be calculated according to its horizontal projected area, and that of a multi-storey building shall be calculated according to multi-storey
Do not calculate the scope of building area
1. Component parts and art decoration protruding from the wall, such as column, pile, plinth, step, pillarless awning, etc
2. Outdoor ladder for maintenance and fire fighting
3. Technical floor with floor height less than 2.2m
4. Structures, such as: independent chimney, flue, oil tank, water tower, oil (water) storage tank, silo, round warehouse, underground civil air defense trunk, branch line, etc
5. Operation platform, feeding platform inside and outside the building and the platform for placing tanks by using the space of the building
6. Roof water tank without enclosure structure, flyover and platform with curtain and scenery hanging on stage and backstage
7. Separate operation room, control room, instrument room and other single floor rooms in single floor building
8. Underground elevated floor of deep foundation with floor height less than 2.2M, and elevated floor of suspended feet of buildings on slope
other
In the calculation of building area, in case of other than the above, we can refer to the spirit of the above rules
2、 Detailed rules for the calculation of the usable area in a residential unit in the code for design of residential buildings (GB 50096-1999)
1. The use area of the suite includes the sum of the use areas of bedroom, living room (Hall), hall, aisle, kitchen, toilet, toilet, storage room, dining room, front room, wall cabinet, etc;
2. The indoor stairs of the jump floor residence are included in the use area according to the area of natural floors;
3. Chimney, ventilation duct and tube well are not included in the use area;
4. The indoor use area is calculated according to the surface size of the structural wall, and if there is a composite insulation layer, it is calculated according to the surface size of the composite insulation layer;
5. When using the space inside the sloping roof, the space with the net height between the lower surface of the roof and the floor less than 1.20 m is not included in the use area; the space with the net height between 1.20 m and 2.10 m is 1 / 2 of the use area; the space with the net height more than 2.10 m is included in the use area;
6. The usable area of sloping roof shall be calculated separately, and shall not be included in the usable area of standard floor and the building area of standard floor. When the total building area needs to be calculated, the coefficient of usable area of standard floor shall be used for reverse calculation

How to calculate building area and floor area?
For example, a 9-story building, 72 meters long and 16 meters wide, what is its building area and floor area?

The floor area is the building area of the ground floor, if the rule is s = 72 * 16. The building area refers to the sum of the building areas of each floor, s = 72 * 16 * 9

What is the difference between building area and floor area?

The difference is very big
Building area, also known as expanded building area, refers to the sum of the plane area of each floor measured by the exterior wall peripheral line of a residential building. It is an economic indicator of the building scale of a building. It includes three items, namely, usable area, auxiliary area and structural area
The land area refers to the area index on the land use certificate obtained by the project
The area of the above ground part in the building area △ the floor area = the plot ratio of the land

How many Mu is the total area of 12000 square meters

12000 / 667 = 18 mu

Residential area of 100000 square meters (high-rise), distribution room size requirements?

High voltage distribution room?
Generally, a residence of 100000 square meters uses two 2000kVA transformers and power distribution cabinets. You can estimate according to the size of these equipment. From the project I manage, the high-voltage power distribution room in a residential area of 130000 square meters covers about 300 square meters

There is a total construction area of 10000 square meters here

Here is a construction area of 10000 square meters totally.

A cuboid tank is 10 meters long, 4 meters wide and 2 meters deep. How many liters of water can it hold at most? How many square meters does it cover?