![](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" viewBox="0 0 72 71" width="72"></svg>)
Cement density? For cement grade 42.5, how many liters is 1000 kg?
I don't know what density you're talking about
The bulk density of ordinary portland cement ranges from 1000 to 1600 kg per cubic meter, which is closely related to the degree of compaction
The density of ordinary portland cement is 3.3.15g/cm3, and that of slag cement, pozzolanic cement and fly ash cement is 2.3.1g/cm3
So you said 1000kg of cement, if calculated according to the bulk density, it is estimated to be several hundred liters, different situations are different
What is the density of 42.5 cement?
I don't know what density you're talking about
The bulk density of ordinary portland cement ranges from 1000 to 1600 kg per cubic meter, which is closely related to the degree of compaction
The density of Portland cement is 3.0 ~ 3.15g/cm3, and that of slag cement, pozzolanic cement and fly ash cement is 2.8 ~ 3.1g/cm3;
20cm thick 5% cement soil, 1 square meter put a few packets of cement, how to calculate
0.2 * 1 * 5% = the volume of cement, and then look at the volume of a package of cement, you will know how many packages of cement to put
RELATED INFORMATIONS
- 1. 400 meters long, 12 meters wide, 20cm thick sand to do 8.5% + 3.5% cement lime soil, how many tons of lime, how many tons of cement? Detailed calculation method! Big brother is 8.5% + 3.5%, and it's cement mixed with lime soil, not cement lime cinder
- 2. Is quicklime powder or hydrated lime powder used in Notoginseng lime soil? If it is quicklime powder, will the volume not expand after solidification?
- 3. Common conversion values between quicklime and hydrated lime, such as how many cubic meters of hydrated lime can be produced per ton of quicklime, and the respective densities of quicklime and hydrated lime
- 4. How many jin of hydrated lime can a cubic meter of quicklime produce? Or how much hydrated lime can be produced
- 5. Is the mix proportion of notoginseng lime soil volume or weight
- 6. What is notoginseng lime soil?
- 7. What is the mass ratio of notoginseng lime soil?
- 8. 2: Is lime soil weight ratio?
- 9. 1. The mix proportion of a reinforced concrete is as follows: P.O 42.5 cement, the surplus coefficient is 1.14, and the density is 3.0 × 103kg / m3; Fly ash is secondary ash (excess coefficient is 1.5), density is 2.2 × 103kg / m3; medium sand, fineness modulus is 2.5, bulk density is 1.4 × 103kg / m3, apparent density is 2.6 × 103kg / m3; (5-31.5) mm graded crushed stone, bulk density is 1.5 × 103kg / m3, apparent density is 2.6 × 103kg / m3; high range water reducing agent (the content is 1.3% of the total amount of cementitious material, the apparent density is 2.6 × 103kg / m3) is added, The design requirements are as follows: the strength grade is C35, the slump is (100 ± 10) mm, and the substitution rate of admixture is 15%. It is known that: (1) the sand rate is 33% when the slump is 60mm; (2) the water consumption is as follows: as shown in the figure below. The cement content in the concrete mixed with fly ash is () kg / m3 When the slump is (70-90) mm, the water consumption is 205KG / m3
- 10. Construction workers mix cement, yellow sand and stones into concrete in a ratio of 2:3:5. There are 2.7 tons of yellow sand. How many tons of cement and stones do you need Such as the problem, using the method of proportion solution
- 11. How to calculate the density formula is up to me
- 12. What is the formula for calculating the maximum dry density? In road subgrade construction, the sand method is used to detect the compactness. The wet density and water content of the soil are known, and the maximum dry density value issued by the laboratory is known, and the maximum dry density of the sample is calculated
- 13. What is the air dry density of wood
- 14. How to calculate dry density with known dry soil weight and wet soil weight moisture content
- 15. What's the density of wet soil
- 16. How to calculate the asphalt in a cubic meter of asphalt concrete? The asphalt aggregate ratio is 5.49%, and the corresponding gross volume density is 2.360g/cm3
- 17. Is 8% lime stabilized soil the same as 8% lime stabilized soil
- 18. How to calculate the specific amount of various materials in cement stabilized macadam The gradation of cement stabilized macadam is 5%: 15%: 80 (cement: Fly Ash: macadam). Now we haven't done the experiment. We don't know the maximum dry density and the best water content. How to calculate the specific dosage of cement, fly ash and Macadam (large, medium and small)! Urgent
- 19. In what range is the dosage of 5% cement stabilized macadam qualified In the detection experiment, the results in what range is qualified, such as the calculation is 4% qualified? What is the error range?
- 20. The water content of alcohol produced in industry should not exceed 10%. At present, there are four kinds of samples (a, B, C and D) with densities of 0.81g/cm3, 0.815g/cm3, 0.82g/cm3 and 0.83g/cm3 respectively. What are the qualified products? (the known alcohol density is 0.8g/cm3) Solution steps. Urgent!